![DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]](http://ae.fpvfaster.com/cdn/shop/files/5200mAh120C6S22.2V_300x300.jpg?v=1719899749)
![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://ae.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_300x300.jpg?v=1722313885)
Spedix IS25 4IN1 25A 2-5S ESC 20x20mm
Specifications:
- Continuous Current: 25 amps
- Burst Current: 35 amps≥10 S
- Input Voltage: 2-5 Cell LiPo
- BEC: No
- Current Detection: Yes
- Dimensions: 29x32x5mm
- Mounting pattern: 20x20mm
- Mounting Holes: 3.7mm (M3 shoulder washers included)
- Firmware: BLHeli_S(QH-15)
- Input signal: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300 & Dshot600
Included:
- 1x 25amp 4in1 ESC
- 10cm red & black 16AWG wire
- 10x M3 shoulder washers (8 required, 2 spare)
- 25v 330μF capacitor
- 2x 1mm JST-SH 8-pin connectors
- 1x Datasheet
Notice:
- If 5S is used, it's recommended to solder the included capacitor.
- The amperage meter scale needs to be set to 200 for the current sensor to work.
