![DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]](http://ae.fpvfaster.com/cdn/shop/files/5200mAh120C6S22.2V_300x300.jpg?v=1719899749)
![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://ae.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_300x300.jpg?v=1722313885)
NewBeeDrone Cricket200 F7 DJI Flight Controller Mini
Cricket 200 FC Specification:
- MPU6000 Gyro
- STM32F722 216mhz
- 3-6S direct battery input
- 5V 1.5A,
- 3V3 100mA
- 9V 2A 18W Design for DJI FPV Air Unit
- 5V Camera Power
- BetaFlight OSD
- 31.5x27 CB with 20x20 mounting holes, weight: 5.85g
- 6 UARTS on board.
- UART1 (Only RX, Air Unit connector)
- UART2 (Free)
- UART3 (Free)
- UART4 (TX and RX connected together for F.Port)
- UART5 (Only RX, ESC Telemetry)
- UART6 (MSP/Configuration Port for Air Unit)
- Built-in 4 IN 1 ESC socket(including ESC telemetry, External current sensor) JST1.0 8Pin
- Plug and plug with NBD Infinity200 ESC. Also compatible with most of the ESC on the market.
- Built-in solder pads for ESC signal output and power
- Printed layout instructions ON the board - no need for instructions!
- DJI FPV Air Unit socket (use UART1 and UART6)
Includes:
- 1x Cricket200 FC F7 flight controller
- 4x Grommets short 4x Grommets Long
- 1x Cricket200 FC to DJI Air module cable 70mm
- 2x silicone wire for Crossfire receiver if needed
Firmware and configuration files: https://github.com/newbeedrone/Cricket200-FC-F7/releases/
