HappyModel Mobula8 Micro 85mm FPV 1-2S TinyWhoop Drone ELRS

  • Dhs. 441.00



HappyModel Mobula8 Micro 85mm FPV  1-2S TinyWhoop Drone BNF ELRS

Please note that if your ELRS Radio Controller is V3, the BetaFlight Target Firmware on the drone need to be upgraded for ELRS 3.0 Binding purpose, please find the firmware and CLI Dump file from the link below:

HappyModel Mobula8 ELRS 3.0 Firmware + CLI Dump

You will need to FLASH the firmware and APPLY the CLI Dump file to the drone.

Are you tired of the power performance of the 1S whoop you own? Do you want more power to ripping and roaring in your backyard? Yes, here comes Mobula8, which is Happymodel’s first attempt on 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motor and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.

 

Features:

  • X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
  • VTX Power up to 400mw
  • ELRS V2.0 (Default), provide firmware to support ELRS V3.0
  • EX1103 KV110000 motors
  • CaddxFPV Ant FPV camera
  • Smooth and powerful
  • Compatible for 1S-2S Lipo/LIHV battery
  • Recommend 2S 450mah/550mah/650mah battery (Not include)

Specifications:

  • Brand Name: Happymodel
  • Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
  • Wheelbase: 85mm
  • Size: 120mm*120mm*50mm
  • Weight: 43g 

 

Receiver option:

  • 2.4G ELRS SPI(Support ELRS v2.0, provide firmware could compatible with elrs v3.0)
  • SPI Frsky D8/D16  not compatible with EMAX E6 radio

 

Package includes:

Item Name Qty
Mobula8 Frame 1
Option1: X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver 1
Option2: X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver



EX1103 KV11000 brushless motor 4
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) 1
Caddx ANT 1200TVL Camera 1
Onboard 5.8G Openvtx 0mw~400mw VTX 1
Canopy for 14mmx14mm camera 1
Screw driver 1

 

Spare parts specifications:

Motor Mode: EX1103 KV11000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
Weight(g):3.8g
No.of Cells(Lipo):1-2S
Propellers Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689 or ICM42688P(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Firmware target: Z_H_30
Default protocol: DSHOT300
Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware
Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Version SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8/D16 modelChannels: 8ch/16ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support






Onboard 5.8g OPENVTX Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Weight: 2g (N.W.)


Customer Reviews

Based on 4 reviews Write a review