![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://ae.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_300x300.jpg?v=1722313885)
GEPRC GEP-ST35 3.5 Inch FPV SMART 35 Drone Frame Kit
Hello every body there is a special new member of GEPRC FreeStyle frame series,and it is released now, GEP-ST35, a 3.5inch FreeStyle frame with light weight.
GEP-ST35 has designed multiple mounting holes, which can install different FC and VTX, It is also can install 8mm-13mm hole size motor, GoPro Hero 8 naked camera and Insta 360 Go2 camera can be installed with GoPro camera mount, 4mm Arm can also be equipped with 2mm reinforced arm, ultra-high strength fuselage.
GEP-ST35 is elaborately designed by geprc team, with small size, lightweight and excellent flight performance.
Specification:
- Brand name: GEPRC
- Model: GEP-ST35
- Wheelbase: 155mm
- Top Plate: 2.0mm
- Bottom Plate: 4.0mm
- Arm Plate: 4.0mm
- Reinforced arm: 2.5mm
- FC mounting holes: 26.5mmx26.5mm/20mmx20mm
- VTX mounting holes: 20mmx20mm
- Motor mounting holes: 9mmx9mm/12mmx12mm
- Size: 142mmx118mmx36mm
- Weight: 47.9g (With 3D prints and reinforced Arm)
Features:
- Small size, light weight, and good flight experience.
- 4mm Arm can also be equipped with 2mm reinforced arm, ultra-high strength fuselage, the Strength rised to a higher level.
- There are a number of installation holes for FC and VTX.
- The motor with 8mm-13mm hole spacing can be installed.
- The mount of GoPro camera is designed to install GoPro Hero 8 naked camera and Insta 360 Go2 camera.
Frame:
- 1x Top Plate
- 1x Bottom Plate
- 2x Camera mounting Plate
- 2x Front reinforced Plate
- 2x Ear reinforced Plate
Screw:
- 6x M2 * 4.0×25 aluminum columns
- 2x M2 * 4mm cup head screws
- 20x M2 * 6.5mm round head screws
- 8x M2 * 7mm round head screws
- 18x M2 * 9mm round head screws
- 4x M2 * 12mm cup head screws
- 1x M2 * 16mm cup head screws
- 4x M2 * 18mm cup head screws
- 4x M2 * 25mm cup head screws
- 4x M2 * 4mm damping rings
- 8x M2 * 6.5mm damping rings
- 2x M2 Nylon shims
- 1x M2 Rivet nuts
- 4x M2 Nylon Nuts
- 4x M2 Lock Nuts
3D Prints:
- 1x VTX antenna mount
- 1x TBS NanoRX antenna mount
- 1x Naked camera mount
Accessories:
- 1x Battery pad
- 1x EVA landing pad
- 1x Battery strap (M15 * 200mm)
- 1x Screwdriver (1.5mm)
- 1x Antenna fixing tubes
- 4x Motor wire protection tubes (35mm)
